Airride Suspension 150psi NPT1/4 Brass Solenoid Valve

• Material: Brass
• Certification: ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
• Car Make: Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
• Position: Front
• OEM: Yes
• Type: Suspension & Steering
• Model NO.: 2W160-10
• Working Medium: Air Water Oil Gas
• Acting Type: Direct Acting
• Orifice: 16mm
• Joint Size: 1/2
• Working Pressure: 0-0.7MPa
• Working Temperature: -5-80ºC
• Body Material: Brass
• Transport Package: Inner Box, Outer Carton...Pallet
• Specification: 6kg
• Trademark: VPC Pneumatic
• Origin: China
• HS Code: 8481804090
• Production Capacity: 500000000PCS/Year

Product Description

Model	2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W4000-40 2W5000-50
Working medium	air  water oil gas
acting type	direct acting
type	normal close normal open
orifice	16mm 20mm 25mm 35mm 40mm 50mm
joint size	G3/8" G1/2"G3/4" G1" G1-1/4" G1-1/2" G2"
working pressure	0~0.7mpa
working temperature	Media:-5~80ºC(NBR Seal), -5~120ºC(Viton Seal) Ambient:-5~45ºC
body material	brass(plastic, stainless steel also avaiable)
seals	NBR VITON

Standard or Nonstandard:Standard
Structure:Control
Pressure:High Pressure
Power:Solenoid
Material:Alloy
Temperature of Media:High Temperature
Media:Air
Port Size:1/4" 3/8" 1/2"
Place of Origin:China (Mainland)
Model Number:VVU-3L-4F
Brand Name:VPC
Application:Air Suspension, Air Suspension

The New Design Air Suspension Solenoid Valve (Accuair Solenoid Valve Manifolds)  is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. It's more smart than our previous manifolds Assembly Valve Block wiring harness 160-4F Solenoid Valve.

Good replacement to Accuair AA-VU4  Air suspension valve block With E-level

Compatiable Suspension Type	4-Corner Full Air Suspension
Voltage Requirements	10.5-16 Volts
Current Requirements	1.1 Amps (for each of the (8) Valves)
Connectors	IP67 certified (immersion up to 3 ft)
Fitting Size	3/8" D.O.T. / P.T.C (x 8), 1/4" NPT (x 4)
No. of Inlet Ports	2
No. of Exhaust Ports	2
Max Operating Pressure	200Psi
Cv Flow Factor	0.33
Average Adjustment Time	2.2 Seconds (from 10% to 50% of travel)

1. Factory Direct
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve