2W (UD) Series 2/2 Way Small Orifice Direct Acting Solenoid Valve

• Customization: Available
• Media: Water
• Temperature: Ordinary Temperature
• Model NO.: 2W025-06
• Actuator: Electric
• Connection Form: Thread
• Type: Direct Acting
• Material: Brass
• Pressure: Ordinary Temperature
• Valve Structure: Direct Action Diaphragm Structure
• Power Supply: DC Solenoid Valve
• Usage: Safety, Emptying, Drain, Temperature Control, Flow Control
• Standard: DIN
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Warranty: 1year
• Acting Type: Direct Acting Type
• Control Style: Normal Close
• Orifice: 2.5mm
• CV Value: 0.23
• Joint Size: G1/8"
• Working Pressure: 0~0.7MPa
• Max. Pressure: 1.0MPa
• Working Temperature: -5~80ºC
• Valve Body: Brass
• Transport Package: Pallet
• Specification: CE, ROHS, SGS, ISO9001
• Trademark: VPC PNEUMATIC
• Origin: China
• HS Code: 8481802190
• Production Capacity: 5000000000000PCS/Year

Product Description

         
  2W(UD) Series 2/2 Direct Acting Solenoid Valve (Small Orifice)

 

Product Description

1. Normal open, available body:Brass;
2. Multiple seals are available for different medium;
3. Wide size range from1/8" to 3/8",with both thread and flange connection;
4. Diaphragm pilot solenoid valve ,with lower working pressure.

Product Specification

Model	2W025-06	2W025-08	2W040-10	2WH012-06	2WH012-08	2WH012-10
Working Medium	Air, Water, Oil, Gas
Acting Type	Direc Acting Type
Control Style	Normal Close
Orifice	2.5mm		4mm	1.2mm		2mm
CV Value	0.23		0.6	0.05		0.15
Joint Size	G1/8"	G1/4"	G3/8"	G1/8"	G1/4"	G3/8"
Working Pressure	Air/Water/Oil/Gas:0~0.7Mpa			Air/Water/Oil/Gas:0~2.0Mpa
Max.Pressure	1.0Mpa			3.5Mpa
Working Temperature	-5~80ºC (The temperature can reach -5~150ºC if change the seal)
Valve Body	Brass
Seal material	NBR, EPDM, VITON

Brass Normally Closed Electric Solenoid Valve is constructed with a durable brass body, two-way inlet and outlet ports with two inch (2") female threaded (NPT) connections. Heat and oil resistant Viton gasket. It suitable for hot or cold water, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, such as gasoline, kerosene, or diesel fuel. It suitable for outdoor use, not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderately high temperature applications, harsh chemicals, flow control for irrigation systems, or reverse osmosis systems.

Leaving the valve powered on for long periods of time will reduce the life of the coil. Whenever possible the valve should be installed in a well ventilated are to increase the life of the coil. The valve is not intended to be left energized as a fail-safe for power outages. In this case please contact us for other options.
 

 

A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly

Normally closed 220V water solenoid valve 2W160-15-AC220V
The solenoid valve features:
1) Wide applications, suitable for various kinds of gases and liquids
2) State-of Arts design and compact construction
3) Reliable service and high sensitivity
4) It can work normally even when the working differential pressure is close to zero
Specifications:
1)normal close or normal open solenoid valves, available body: Brass
2)Multiple seals are available for different medium
3)Wide size range from 1/4" to 2", with both thread
The valve body material: Brass
Using fluid: Air, water and oil
Style: Normally closed (turn on the electricity, the solenoid valve will start to work, turn off the electricity the solenoid valve will stop working. ).
Voltage: AC220V DC24V AC380V AC110V allow increase or decrease 10%
Pipe size: 1 /4''-2''
Flow aperture: 2.5mm-50mm
Pressure: 0 ~ 1.0 MPa
Fluid temperature: -5 ~ 150 degress C
Stock: More than 100 pieces

Delivery: Air, sea, express service

Install and use Attentions
1. When install the solenoid valve, medium flow direction must be consistent with the direction arrow as shown in the valve body, the valve must be installed in horizontal pipe runs. Solenoid valve coil keep in a vertical position, this valve can not be put in these places what with the splashing water or water leakage. The 2A model can be used in the underwater environment.
2. Before installing the solenoid valve, pipeline should be cleaned thoroughly, the medium what crossing into the pipeline must be clean, viscosity<4°E.
3. Front the valve should be installed the 80-100 mesh /filter prevent the valve core be jammed, when the pressure be larger where after the valve, should be install the one-way valve. prevent the medium backflow or cause the solenoid valve closed lax.
4. In using should be regular cleaning dirt on the surface of the movable iron core and the piston, in dismounting should check the sealing gasket at the same time, when found damaged should be replaced timely.
5. This valve is unfavorable use in the explosive dangerous places. When need, please indicate in ordering.
6. Should be install the by-pass device, to ensure the normal production, for the solenoid valve needs change when the failure happens or need cleaning
7. According to the range of values from the scutcheon for choose power supply conditions and control its relay, place the down-lead of solenoid valve in the circuit, when Installing system, no grounding solenoid valve should be grounded, in order to ensure the safety.

 

How To Order

Ordering Code 2W (UD) Series 2/2 Direct Acting Solenoid Valve (Small Orifice)

2W    025       -     08       F       D        Nil      AC110V

2W→ Type Code	2W: Standard	2WH: High Pressure
025→ Orifice	012: 1.2mm	020: 2mm	025: 2.5mm	040: 4mm
08→ Joint Size	06: 1/8''	08: 1/4''	10: 3/8''
F→ Mounting Type	Blank: Standard	F: With Flange
D→ Coil Type	Blank: Flying leads	D: DIN Type	E: Anti-explosion Coil	G: Water-Proof Coil
Nil→ Control Style	Blank: Normal Close	T: Normal Open
AC110V→ Standard	DC12V	DC24V	AC24V 50/60Hz	AC110V 50/60Hz
	AC220V 50/60Hz	AC380V 50/60Hz

Note: Only 2W040 valve can make normal open type
 

Main Dimensions

Product Category

Packaging & Shipping

Packaging type: 

VPC Box

White Box

Color Box

VPC Carton

Pallet

Delivery time:

Conventional Products	Customized Products	Specially Customized Products
On the day of payment	10 workdays	25 workdays.

Payment term:

PayPal	TT	Western Union	DP	LC	Money Gram	Online Bank	Alibaba Credit Order	Pay Later	DA
YES	YES	YES	NO	NO	YES	YES	YES	YES	YES

Transportation:

Express (DHL, UPS, TNT, JCEX, FEDEX) is available.

Sea and Air transports are available.

The most suitable transport way will be chosen for you.

About Us

FAQ

Q1: What is your quality assurance?
A: We will inspect one by one before delivery. If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.

Q2: What are your terms of payment?
A: TT, we'll show you the photos of the products and packages before you pay the balance.
B: PayPal payment, Bank transfer, Alibaba Trade Assurance order also available.

Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.

Q4: What is your sample policy?
A: Some free samples can be offered if you contact us.

Q5: How about the warranty?
A: 1 year warranty.