2W Stainless Steel Solenoid Valve for Air Ride Suspension

• Media: Oil
• Temperature: Ordinary Temperature
• Actuator: Electric
• Connection Form: Thread
• Type: Direct Acting
• Material: Brass
• Model NO.: 2W
• Pressure: Ordinary Temperature
• Valve Structure: Direct Action Diaphragm Structure
• Power Supply: DC Solenoid Valve
• Usage: Safety, Emptying, Drain, Temperature Control, Flow Control
• Standard: DIN
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Warranty: 1 Year
• Transport Package: Pallet
• Specification: CE, ROHS, SGS
• Trademark: VPC PNEUMATIC
• Origin: China
• HS Code: 8481802190
• Production Capacity: 5000000000000PCS/Year

Product Description

Product Description
Normally closed 220V water solenoid valve 2W160-15-AC220V
The solenoid valve features:
1) Wide applications, suitable for various kinds of gases and liquids
2) State-of Arts design and compact construction
3) Reliable service and high sensitivity
4) It can work normally even when the working differential pressure is close to zero
Specifications:
1)normal close or normal open solenoid valves, available body: Brass
2)Multiple seals are available for different medium
3)Wide size range from 1/4" to 2", with both thread
The valve body material: Brass
Using fluid: Air, water and oil
Style: Normally closed (turn on the electricity, the solenoid valve will start to work, turn off the electricity the solenoid valve will stop working. ).
Voltage: AC220V DC24V AC380V AC110V allow increase or decrease 10%
Pipe size: 1 /4''-2''
Flow aperture: 2.5mm-50mm
Pressure: 0 ~ 1.0 MPa
Fluid temperature: -5 ~ 150 degress C
Stock: More than 100 pieces
Delivery: Air, sea, express service

Model		2W025-06		2W025-08	2W040-08	2W040-10	2W160-10	2W160-15	2W200-20	2W250-25	2W350-35	2W400-40	2W500-50
G  Connection		1/8" ,   1/4"		1/8" ,   1/4"	1/4"	3/8"	3/8"	1/2"	3/4"	1"	1¼ "	1½ "	2"
Orifice  Size	mm	2.5			4		16		20	25	35	40	50
Motion  Pattern		Direct  Action					Semi-direct  Lift
Cv  Value		0.23			0.6		4.8		7.6	12	24	29	48
L	mm	40.5	40.5		40.5	52.5	69	69	73	99	119	123	168
H	mm	75	75		75	90	117	117	123.5	134.5	170	172	209
H1	mm	66	66		66	76	101	101	107	113	143	144	172
Medium  temperature		-5  ÷ 80º C
Pressure	bar	Normally  closed  : 0÷ 10;   Normally  Open: 0÷ 6
Power		AC: 220V~AC: 230V/50-60HZ    22VA;     AC110  ~AC: 120V/50-60HZ    22VA;     DC24    18W;     DC12    17W  ;     Range: ± 10%,

Brass Normally Closed Electric Solenoid Valve is constructed with a durable brass body, two-way inlet and outlet ports with two inch (2") female threaded (NPT) connections. Heat and oil resistant Viton gasket. It suitable for hot or cold water, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, such as gasoline, kerosene, or diesel fuel. It suitable for outdoor use, not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderately high temperature applications, harsh chemicals, flow control for irrigation systems, or reverse osmosis systems.
Leaving the valve powered on for long periods of time will reduce the life of the coil. Whenever possible the valve should be installed in a well ventilated are to increase the life of the coil. The valve is not intended to be left energized as a fail-safe for power outages. In this case please contact us for other options.
A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly
Install and use Attentions:
1. When install the solenoid valve, medium flow direction must be consistent with the direction arrow as shown in the valve body, the valve must be installed in horizontal pipe runs. Solenoid valve coil keep in a vertical position, this valve can not be put in these places what with the splashing water or water leakage. The 2A model can be used in the underwater environment.
2. Before installing the solenoid valve, pipeline should be cleaned thoroughly, the medium what crossing into the pipeline must be clean, viscosity<4°E.
3. Front the valve should be installed the 80-100 mesh /filter prevent the valve core be jammed, when the pressure be larger where after the valve, should be install the one-way valve. prevent the medium backflow or cause the solenoid valve closed lax.
4. In using should be regular cleaning dirt on the surface of the movable iron core and the piston, in dismounting should check the sealing gasket at the same time, when found damaged should be replaced timely.
5. This valve is unfavorable use in the explosive dangerous places. When need, please indicate in ordering.
6. Should be install the by-pass device, to ensure the normal production, for the solenoid valve needs change when the failure happens or need cleaning
7. According to the range of values from the scutcheon for choose power supply conditions and control its relay, place the down-lead of solenoid valve in the circuit, when Installing system, no grounding solenoid valve should be grounded, in order to ensure the safety.

• Open and close quickly, stable performance, easy to use.
• Connection - no polarity, "+" and "-" can be interchanged.
• The valve timing is uncertain, however it is fast acting, less than one second.
• 100% duty cycle - like most solenoid valves, the coil will become hot to the touch when left on continuously. The temperature will stabilize without failure.
• Mounting position is preferably coil up but can be mounted in any position.
• • Body Material: Brass
  • Suitable Media: Water-Air-Gas-Etc
  • Components: Stainless Steel
  • Seal Material: NBR
  • Operation Type: Semi-Direct Lift Valve
  • Coil Connection: 5.5" Lead Wire
  • Voltage: 110V
  • Power Rating: 22W
  • Function: Normally Closed
  • Connection: 2" Inch FNPT
  • Temperature Range: 20-265°F
  • Pressure Range: 0-145 PSI
  • Power Requirements: 40VA-40W
  • Orifice Size: 50 mm
  • Cv Value: 48
  • Weight: 7.1 lbs
  • Height: 6.9"
  • Length: 5.3"
  • Width: 4.25"
  •