| Customization: | Available |
|---|---|
| Customized: | Non-Customized |
| Number of Cylinders: | 0 |
|
Still deciding? Get samples of US$ 9.3/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | ACV-05 | ACV-10 | ACV-15 | ACV-20 | ACV-25 | ACV-30 | |
| Nozzle Diameter (mm) | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | |
| Vacuum Pressure (kPa) | R (Pressure Type) | -88.6 | -91.8 | -91.8 | -91.8 | -91.8 | -91.8 |
| L (Flow Type) | -57.2 | -57.2 | -57.2 | -57.2 | -57.2 | -57.2 | |
| Flow Rate (l/min) | R | 6 | 27 | 63 | 110 | 160 | 225 |
| L | 9 | 36 | 95 | 165 | 250 | 350 | |
| Air Consumption (l/min) | 13 | 44 | 100 | 180 | 265 | 385 | |
| Supply Pressure (MPa) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
| Model | ACV-05 | ACV-10 | ACV-15 | ACV-20 | ACV-25 | ACV-30 |
| A | 8 | 8 | 10 | 13 | 16 | 20 |
| B | 32 | 32 | 35 | 40 | 60 | 60 |
| C | 16 | 16 | 20 | 27 | 40 | 40 |
| D | 10 | 10 | 11 | 15 | 20 | 20 |
| E | Rp1/8 | Rp1/8 | Rp1/4 | Rp1/2 | Rp3/4 | Rp3/4 |
| F | 14 | 14 | 20 | 28 | 20 | 33 |
| G | 20 | 20 | 25 | 32 | 50 | 50 |
| H | 4.5 | 4.5 | 5 | 7 | 5.5 | 5.5 |
| I | 4.2 | 4.2 | 4.5 | 6 | 6 | 6 |
| L | 45 | 45 | 63 | 85 | 100 | 118 |
| M | 14 | 14 | 17 | 22 | 26 | 30 |
| P | Rp1/8 | Rp1/8 | Rp1/4 | Rp1/4 | Rp3/8 | Rp1/2 |
| V | Rp1/8 | Rp1/8 | Rp1/4 | Rp3/8 | Rp1/2 | Rp3/4 |
| Silencer model | PSU-6 | PSU-6 | PSU-8 | PSU-15 | PSU-20 | PSU-20 |
Exhaust and flow characteristics
Exhaust characteristics refer to the relationship between vacuum pressure, suction flow or air consumption varying with the change of air supply pressure of vacuum generator. They increase as the supply pressure increases. Flow characteristics refer to the relationship between vacuum pressure and suction flow when the supply pressure of vacuum generator is constant. Suction flow rate is the flow of air inhaled from the suction port.
Suction time
It refers to the time when the vacuum pressure in the vacuum suction cup reaches the required vacuum pressure or the time required when the air supply valve is switched to the vacuum pressure switch. It is related to the volume of the adsorption chamber (diffusion chamber, adsorption pipe volume and suction cup volume, etc.), the leakage of the adsorption surface and the required vacuum pressure.
Air consumption
The air consumption of pneumatic vacuum generator is determined by the diameter of nozzle, but it is also related to the working pressure. For the same nozzle diameter, the air consumption increases with the increase of working pressure. The nozzle diameter is the main basis for selecting a vacuum ejector. The larger the nozzle diameter, the greater the suction flow and air consumption, and the lower the vacuum pressure. The smaller the nozzle diameter, the smaller the suction flow and air consumption, but the higher the vacuum pressure.
vacuum pressure
There is a maximum vacuum pressure, when the maximum is exceeded, even if the working pressure is increased, the vacuum pressure will not increase but will decline. The maximum vacuum generated by the vacuum generator is -88kPa. In actual use, it is suggested that the vacuum pressure can be set at -70KPa and the working pressure is about 0.5Mpa.
Q1:What is your quality assurance?
A:We will inspect one by one before delivery.If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.
Q2:What is your terms of payment?
A: TT ,We'll show you the photos of the products and packages before you pay the balance.
B: Paypal payment, Western Union,Bank transfer,Alibaba Trade Assurance order also available.
Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.
Q4:What is your sample policy?
A: Some free samples can be offered if you contact us.
Q5:How about the warranty?
A: All of our products will be guaranteed 1 year warranty.
){kind=link}