SMC Itv1050 Itv3010 Itv3050 Itv3010 Electro Pneumatic Pressure Air Regulator

• Customization: Available
• Media: Gas
• Temperature: Ordinary Temperature
• Model NO.: ITV1050
• Actuator: Pneumatic
• Connection Form: Thread
• Type: Direct Acting
• Material: Carbon Steel
• Pressure: Ordinary Pressure
• Valve Structure: Pilot Piston Structure
• Power Supply: DC Solenoid Valve
• Usage: Safety, Drain, Temperature Control
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Port Size: 1/4
• Heat-Resistant Class: IP65
• Keywords: Electro-Pneumatic Pressure Regulator
• Available Port Sizes: 1/4, 3/8 and 1/2
• Available in: MPa, Kgf/Cm², Bar, Psi, and Kpa Units
• Transport Package: Vpc Box
• Specification: 10x5x5cm
• Trademark: VPC pneumatic
• Origin: China
• HS Code: 848180219
• Production Capacity: 10000000/Month
• Package Size: 8.00cm * 6.00cm * 6.00cm
• Package Gross Weight: 1.000kg

Product Description

SMC ITV1050 ITV3010 ITV3050 ITV3010 Electro Pneumatic Pressure Air Regulator

Product Description

SMC DC24V ITV series Electric Regulator Proportional Pneumatic Valve

The electric proportional valve controls the gas pressure through the electric signal, which can realize the continuous and stepless adjustment of the gas pressure, and can realize the remote control and program control.
1) electric proportional mode, realizing non-pole control of outlet pressure.2) it can realize remote control and program control.
3) compared with intermittent control, the system is simplified and the components are greatly reduced.
4) compared with hydraulic proportional valve, small volume, light weight, compact structure, lightweight, low cost, but the response speed is much slower than the hydraulic system, more sensitive to load changes.
5) low power consumption: less than 4W (communication form).
6) no fire, no pollution.It is less affected by temperature change.

 

Ordering Code

Product specifications

Model		ITV1010	ITV1030	ITV1050
		ITV2010	ITV2030	ITV2050
		ITV3010	ITV3030	ITV3050
Minimum supply pressure		Set pressure + 0.1 MPa
Maximum supply pressure		0.2 MPa	1.0 MPa
Set pressure range *1		0.005 to 0.1 MPa	0.005 to 0.5 MPa	0.005 to 0.9 MPa
Power supply	Voltage	24 VDC ±10%
	Current consumption	0.12 A or less
Input signal	Current type	4 to 20 mA DC, 0 to 20 mA DC
	Voltage type	0 to 5 VDC, 0 to 10 VDC
Input impedance	Current type	250 Ω or less
	Voltage type	Approx. 6.5 kΩ
Output signal (Monitor output)		Analog output: 4 to 20 mA DC (Source type)
Linearity		±1%F.S. or less
Hysteresis		0.5%F.S. or less
Repeatability		±0.5%F.S. or less
Sensitivity		0.2%F.S. or less
Temperature characteristics		±0.12%F.S./°C or less
Output pressure display *2	Accuracy	±2%F.S. ±1 digit or less
	Minimum unit	MPa: 0.001, kgf/cm2: 0.01, bar: 0.01, psi: 0.1 *3, kPa: 1
Ambient and fluid temperatures		0 to 50°C (No condensation)
Enclosure		IP65
Weight	TV10▭0	Approx. 250 g (without options)
	ITV20▭0	Approx. 350 g (without options)
	ITV30▭0	Approx. 645 g (without options)

*1. When the product is in an "as shipped" condition, the output pressure when a 0% input signal is applied is 0 kPa. However, there are some cases in which there is a residual pressure of 0.005 MPa or less. If the pressure needs to be reduced to 0 kPa, install a 3-port valve on the output side to exhaust the residual pressure.

*2. The adjustment of a numerical value such as zero or span adjustment is set based on the minimum unit of the output pressure display. (Example: 0.001 to 0.500 MPa) Note that this unit cannot be changed.

*3. The minimum unit for 0.9 MPa (130 psi) types is 1 psi.

* The above characteristics are confined to the static state. When air is consumed on the output side, the pressure may fluctuate.

Detailed Photos

 

Product Parameters

 

Related Products

Company Profile

Ningbo VPC Pneumatic Company is dedicated to providing the highest quality hydraulic and pneumatic products to assure we achieve the requisite level of product performance, reliability, and value for our customers. We manufacture and export Pneumatic Cylinders, Directional Solenoid Valves, air fittings, air hoses, air preparation units, pressure regulators, etc pneumatic automation components, these are widely used in automatic industrial, robots, packaging equipment, blow molding machine equipment, and Medical Industry, food, and beverage, metals, mining and minerals, life sciences, automotive, marine, transportation, wood, paper and printing industries.

Export to Europe, Latin America the USA, South Asia, and middle East, because of high quality,

As a 20-year manufacturer, we can provide professional solutions according to your application needs and use industry. Here are what we can provide with you

1:Customized products to save your costs

2:Fast delivery and standard package

3:200% test before ship
4:CE/ROHS/ISO/FDA certificate