Vpc Series Angle Valve Full Stainless Steel Double Acting Normal Close Angle Valve

• Temperature: High Temperature
• Media: Acid
• Material: Stainless Steel
• Standard: DIN
• Valve Plug: Alloy
• Connection Form: Thread
• Model NO.: VPC10-40
• Open Manner: Quick-Opening
• Size: 0.75
• Usage: Sanitary Ware, Heating Pipeline
• Situation: Industrial
• Service Life: >3 Years
• Transport Package: Inner Box, Outer Carton...Pallet
• Specification: Namur valve with angle seat valve
• Trademark: VPC Pneumatic
• Origin: China
• HS Code: 8481804090
• Production Capacity: 500000000PCS/Year

Product Description

Vpc Series Angle Valve Full Stainless Steel Double Acting Normal Close Angle Valve

Y-type Plastic Angle-Seat Valve 's Summary:

  Y-type Stainless Steel Angle-Seat Valve are widely used in chemical process, food processing(no sanitary), sterilizers, autocalves, highly viscous liquid etc equipments.

stainless steel 1/2" two way angle valve

Advantages:
1. Large fluid amount, low resistance, no water-hammer
2. Y-type shape piston operated 2/2 way pneumatic 1/2" two way angle valve enlarged the flowing section
3. Actuator material is stainless steel, 360 angle rolling freely.
Usage:
1. Bear & drinks filling machinery
2. Textile printing & dying
3. Gas industry.
4. Chemical industrial
5. water / sewage disposal.
Just feel free to contact with me for a big discount!

Available port size

DN15, 20, 25, 32, 40, 50

Y-type Plastic Angle-Seat Valve's Specifications:

Control type	Normal closed,normal open,double acting
Cylinder material	stainless steel, polyamide PA
Pneumatic accessories	Limit switch, locator, solenoid valve, filter relief-pressure valve, manual operating device
Medium temperature	PTFE:-30~180ºC   F46:-30~+220ºC
Environment temperature	-30~80ºC
Nominal pressure	1.0~1.6MPa
Nominal diameter	DN10-50-80mm
Connection type	Thread,Flanged, Clamp, Welded
Body construction	One-piece, Y-type
Body material	304,316, 316L
Spool pressure	304,316, 316L
Seal material	PTFE,F46
Applicable medium	Steam, water, air, oil etc.

Y type Plastic Angle seat valves's installation and disassembly :

1. Based on concrete conditions select the valve installations direction

2. Installation charge of road should be cleaned to ensure no impurites or medium welding slag, so as not to damage the valves, causing leakage.

3. Install welded vavle, be sure to detach the valve actuator

4. Select the appropriate adjustment range of the regulator

5. Ensure that the air pressure range sufficient capacity

6. Check to ensure seal integrity of the connection

7. Valve repair or replacement, the demolition of the body and the connecton in the room temperature, the valve under the state open to avoid damage to the thread

8. Installation and connection in the body the threads coated with a small amount of thread grease, and tighten

We also supply the full stainless steel angle seat valves, more information, welcome to contact with me, or visit our website:vpcpneumatic.en.made-in-china.com, thank you