2W (UD) Series Brass Body Direct Acting Small Orifice Solenoid Valve

• Media: Air, Oil, Water
• Temperature: High Temperature
• Actuator: Electric
• Connection Form: Thread
• Type: Direct Acting
• Material: Brass
• Model NO.: 2W025-06
• Pressure: Ordinary Pressure
• Valve Structure: Direct Action Diaphragm Structure
• Power Supply: AC Solenoid Valve
• Usage: Safety, Emptying, Drain, Temperature Control, Flow Control
• Warranty: 1 Year
• Working Medium: Air, Water, Oil, Gas
• Acting Type: Direct Acting Type
• Control Style: Normal Close
• Max. Pressure: 1.0MPa
• Working Temperature: -5~80ºC
• Valve Body: Brass
• Transport Package: Carton
• Specification: CE, ROHS, SGS. ISO9001
• Trademark: vpc
• Origin: China
• HS Code: 8481802190
• Production Capacity: 500000000PCS/Year

Product Description

 

High Quality 2W (UD) Series Brass Body
Direct Acting Small Orifice Size Solenoid Valve

 

Product Description

• Normal open, available body:Brass;
• Multiple seals are available for different medium;
• Wide size range from1/8" to 3/8",with both thread and flange connection;
• Diaphragm pilot solenoid valve ,with lower working pressure.

Product Specification

Model	2W025-06	2W025-08	2W040-10	2WH012-06	2WH012-08	2WH012-10
Working Medium	Air,Water,Oil,Gas
Acting Type	Direc Acting Type
Control Style	Normal Close
Orifice	2.5mm		4mm	1.2mm		2mm
CV Value	0.23		0.6	0.05		0.15
Joint Size	G1/8"	G1/4"	G3/8"	G1/8"	G1/4"	G3/8"
Working Pressure	Air/Water/Oil/Gas:0~0.7Mpa			Air/Water/Oil/Gas:0~2.0Mpa
Max.Pressure	1.0 Mpa			3.5 Mpa
Working Temperature	-5~80ºC (The temperature can reach -5~150ºC if change the seal)
Valve Body	Brass
Seal material	NBR,EPDM,VITON

 

How To Order

Ordering Code 2W (UD) Series 2/2 Direct Acting Solenoid Valve (Small Orifice)

2W       025      -         08         F         D       Nil       AC110V

 

2W→ Type Code	2W: Standard	2WH: High Pressure
025→ Orifice	012: 1.2mm	020: 2mm	025: 2.5mm	040: 4mm
08→ Joint Size	06: 1/8''	08: 1/4''	10: 3/8''
F→ Mounting Type	Blank: Standard	F: With Flange
D→ Coil Type	Blank: Flying leads	D: DIN Type	E: Anti-explosion Coil	G: Water-Proof Coil
Nil→ Control Style	Blank: Normal Close	T: Normal Open
AC110V→ Standard	DC12V	DC24V	AC24V 50/60Hz	AC110V 50/60Hz
	AC220V 50/60Hz	AC380V 50/60Hz

Brass Normally Closed Electric Solenoid Valve is constructed with a durable brass body, two-way inlet and outlet ports with two inch (2") female threaded (NPT) connections. Heat and oil resistant Viton gasket. It suitable for hot or cold water, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, such as gasoline, kerosene, or diesel fuel. It suitable for outdoor use, not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderately high temperature applications, harsh chemicals, flow control for irrigation systems, or reverse osmosis systems.
Leaving the valve powered on for long periods of time will reduce the life of the coil. Whenever possible the valve should be installed in a well ventilated are to increase the life of the coil. The valve is not intended to be left energized as a fail-safe for power outages. In this case please contact us for other options.
A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly

Install and use Attentions:
1. When install the solenoid valve, medium flow direction must be consistent with the direction arrow as shown in the valve body, the valve must be installed in horizontal pipe runs. Solenoid valve coil keep in a vertical position, this valve can not be put in these places what with the splashing water or water leakage. The 2A model can be used in the underwater environment.
2. Before installing the solenoid valve, pipeline should be cleaned thoroughly, the medium what crossing into the pipeline must be clean, viscosity<4°E.
3. Front the valve should be installed the 80-100 mesh /filter prevent the valve core be jammed, when the pressure be larger where after the valve, should be install the one-way valve. prevent the medium backflow or cause the solenoid valve closed lax.
4. In using should be regular cleaning dirt on the surface of the movable iron core and the piston, in dismounting should check the sealing gasket at the same time, when found damaged should be replaced timely.
5. This valve is unfavorable use in the explosive dangerous places. When need, please indicate in ordering.
6. Should be install the by-pass device, to ensure the normal production, for the solenoid valve needs change when the failure happens or need cleaning
7. According to the range of values from the scutcheon for choose power supply conditions and control its relay, place the down-lead of solenoid valve in the circuit, when Installing system, no grounding solenoid valve should be grounded, in order to ensure the safety.

Main Dimensions

Product Category

Packaging & Shipping

Packaging type: 

VPC Box

White Box

Color Box

VPC Carton

Pallet

Delivery time:

Conventional Products	Customized Products	Specially Customized Products
On the day of payment	10 workdays	25 workdays.

Payment term:

PayPal	TT	Western Union	DP	LC	Money Gram	Online Bank	Alibaba Credit Order	Pay Later	DA
YES	YES	YES	NO	NO	YES	YES	YES	YES	YES

Transportation:

Express (DHL, UPS, TNT, JCEX, FEDEX) is available.

Sea and Air transports are available.

The most suitable transport way will be chosen for you.

About Us

FAQ

Q1: What is your quality assurance?
A: We will inspect one by one before delivery. If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.

Q2: What are your terms of payment?
A: TT, we'll show you the photos of the products and packages before you pay the balance.
B: PayPal payment, Bank transfer, Alibaba Trade Assurance order also available.

Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.

Q4: What is your sample policy?
A: Some free samples can be offered if you contact us.

Q5: How about the warranty?
A: 1 year warranty.