SMC Itv 1050 Pressure Regulator Proportional Valve for Machine Electronic Pneumatic Regulator

• Customization: Available
• Media: Gas
• Temperature: Ordinary Temperature
• Model NO.: ITV1050
• Actuator: Pneumatic
• Type: Direct Acting
• Material: Carbon Steel
• Pressure: Ordinary Pressure
• Power Supply: DC Solenoid Valve
• Usage: Safety, Drain, Temperature Control
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Port Size: 1/4′′
• Heat-Resistant Class: IP65
• Transport Package: Vpc Box
• Specification: 10x5x5cm
• Trademark: VPC
• Origin: China
• HS Code: 848180219
• Production Capacity: 10000000/Month

Product Description

Product Description

SMC ITV 1050 pressure regulator proportional valve for machine electronic pneumatic regulator 
 

The electric proportional valve controls the gas pressure through the electric signal, which can realize the continuous and stepless adjustment of the gas pressure, and can realize the remote control and program control.

Feature

1) electric proportional mode, realizing non-pole control of outlet pressure.
2) it can realize remote control and program control.
3) compared with intermittent control, the system is simplified and the components are greatly reduced.
4) compared with hydraulic proportional valve, small volume, light weight, compact structure, lightweight, low cost, but the response speed is much slower than the hydraulic system, more sensitive to load changes.
5) low power consumption: less than 4W (communication form).
6) no fire, no pollution.It is less affected by temperature change.

How To Order

ITV 3 0 10 - 01 2 S - Q

ITV→Type Code

3→Model

1:1000 2:2000 3:3000 1→Pressure range

1:0.1MPa 3:0.5MPa 5:0.9MPa

0→Power supply voltage

0:24VDC 1:12 to 15VDC

0→Input signal

0:Current 4 to 20 mA (Sink type)
1:Current 0 to 20 mA (Sink type) 2:Voltage 0 to 5 VDC
3:Voltage 0 to 10 VDC
4*:Voltage 0 to 10 VDC *Option

1→Monitor output

0^*:None(for preset input)

1:Analog output 1 to 5V DC

2*:Switch output/NPN output

3*:Switch output/PNP output

4*:Analog output 4 to mA (Sink type)

*Option

→Thread type

-:Rc N*:NPT

T*:NPTF F*:G

Q→ CE compliance

2→Port size
1:1/8(1000 type)
2:1/4(1000,2000,3000 type)
3:3/8(2000,3000 type)
4:1/2(3000 type)

s→Cable connector type

S:Straight type 3 m

L:Right angle type 3m

N:Without cable connector

→Pressure display unit

-:MPa 2:kgf/cm²

3:bar 4:PSI

5:kPa

 

Model		ITV1010	ITV1030	ITV1050
		ITV2010	ITV2030	ITV2050
		ITV3010	ITV3030	ITV3050
Minimum supply pressure		Set pressure + 0.1 MPa
Maximum supply pressure		0.2 MPa	1.0 MPa
Set pressure range *1		0.005 to 0.1 MPa	0.005 to 0.5 MPa	0.005 to 0.9 MPa
Power supply	Voltage	24 VDC ±10%
	Current consumption	0.12 A or less
Input signal	Current type	4 to 20 mA DC, 0 to 20 mA DC
	Voltage type	0 to 5 VDC, 0 to 10 VDC
Input impedance	Current type	250 Ω or less
	Voltage type	Approx. 6.5 kΩ
Output signal (Monitor output)		Analog output: 4 to 20 mA DC (Source type)
Linearity		±1%F.S. or less
Hysteresis		0.5%F.S. or less
Repeatability		±0.5%F.S. or less
Sensitivity		0.2%F.S. or less
Temperature characteristics		±0.12%F.S./°C or less
Output pressure display *2	Accuracy	±2%F.S. ±1 digit or less
	Minimum unit	MPa: 0.001, kgf/cm2: 0.01, bar: 0.01, psi: 0.1 *3, kPa: 1
Ambient and fluid temperatures		0 to 50°C (No condensation)
Enclosure		IP65
Weight	TV10▭0	Approx. 250 g (without options)
	ITV20▭0	Approx. 350 g (without options)
	ITV30▭0	Approx. 645 g (without options)

* When the product is in an "as-shipped" condition, the output pressure when a 0% input signal is applied is 0 kPa. However, there are some cases in which there is a residual pressure of 0.005 MPa or less. If the pressure needs to be reduced to 0 kPa, install a 3-port valve on the output side to exhaust the residual pressure.
* The adjustment of a numerical value such as zero or span adjustment is set based on the minimum unit of the output pressure display. (Example: 0.001 to 0.500 MPa) Note that this unit cannot be changed.
* The minimum unit for 0.9 MPa (130 psi) types is 1 psi.
* The above characteristics are confined to the static state. When air is consumed on the output side, the pressure may fluctuate.

 

 

Company Profile

VPC company,which was founded in 1985,as a leading manufacturer,is dedicated to serve the automation and labor saving requirements with our pneumatic product range.

Above,coupled with close connection with customers'requirements,enable us to manufacture and make good valve,high quality products and to operate successfully around the world.As natural result of such policy VPC has be recognized to be in compliance with the requirements as provided for the quality system standard ISO 9001:2000,as well as the CE Certificate,which is the first pneumatic enterprise who get both certificates in Ningbo,China.

VPC bulit an excellent sales team is talking advantage of a widespread net of local and foreign distributorsin constant expansion in the main worldwide strategic areas.We believe the diversity of our product line,and the sincere work of our staff will make VPC to be world class performance leaders of pneumatic products.

 

Packaging & Shipping

VPC Box

White Box

Color Box

VPC Carton

Pallet

Delivery time:

conventional products	customized products	specially customized products
on the day of payment	10 workdays	25 workdays.

Payment term:

Paypal	TT	Western Union	DP	LC	Money Gram	Online Bank	Alibaba credit order	Pay later	DA
YES	YES	YES	NO	NO	YES	YES	YES	YES	YES

Transportation:

Express(DHL,UPS,TNT,JCEX,FEDEX) is available.

Sea and Air transports are available.

The most suilable transport way will be chosen for you.

 

FAQ

Q1:What is your quality assurance?
A:We will inspect one by one before delivery.If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.

Q2:What is your terms of payment?
A: TT ,We'll show you the photos of the products and packages before you pay the balance.
B: Paypal payment, Bank transfer,Alibaba Trade Assurance order also available.

Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.

Q4:What is your sample policy?
A: Some free samples can be offered if you contact us.

Q5:How about the warranty?
A: 1 year warranty.